IS49NLC96400A-25WBLI

IS49NLC96400A-25WBLI 特徵

533MHz DDR operation (1.067 Gb/s/pin data rate) 38.4Gb/s peak bandwidth (x36 at 533 MHz clock frequency)
Differential input clocks (CK, CK#)
Differential input data clocks (DKx, DKx#)
On-die DLL generates CK edge-aligned data and
Reduced cycle time (15ns at 533MHz)
32ms refresh (16K refresh for each bank; 128K refresh command must be issued in total each 32ms) 8 internal banks
Non-multiplexed addresses (address multiplexing option available)
SRAM-type interface
Programmable READ latency (RL), row cycle time, and burst sequence length
Balanced READ and WRITE latencies in order to optimize data bus utilization
Data mask signals (DM) to mask signal of WRITE data; DM is sampled on both edges of DK. OPTIONS
Package:  144-ball WBGA (lead-free) output data clock signals
Data valid signal (QVLD)
HSTL I/O (1.5V or 1.8V nominal)
On-die termination (ODT) RTT
Operating temperature: 25-60Ω matched impedance outputs 2.5V VEXT, 1.8V VDD, 1.5V or 1.8V VDDQ I/O IEEE 1149.1 compliant JTAG boundary scan Commercial (TC = 0° to +95°C ) Industrial (TC = -40°C to +95°C; TA = -40°C to +85°C)
Configuration:  64Mx9  32Mx18  16Mx36