規格 16Mx18
接口 Common I/O
速度 5 = tCK = 5ns; tRC = 20ns
腳位/封裝 BGA(144)
狀態 Prod
產品系列 49NL = RLDRAM®2
焊接 L = 無鉛
温規 I = 工業級 (-40C to +85°C)
外包裝 卷轴包

IS49NLC18160-5BLI-TR 特徵

  • 400MHz DDR operation (800Mb/s/pin data rate) 28.8Gb/s peak bandwidth (x36 at 400 MHz clock frequency)
  • Differential input clocks (CK, CK#)
  • Differential input data clocks (DKx, DKx#)
  • On-die DLL generates CK edge-aligned data and
  • Reduced cycle time (15ns at 400MHz)
  • 32ms refresh (8K refresh for each bank; 64K refresh command must be issued in total each 32ms) 8 internal banks
  • Non-multiplexed addresses (address multiplexing
  • option available) SRAM-type interface Programmable READ latency (RL), row cycle time, and burst sequence length
  • Balanced READ and WRITE latencies in order to optimize data bus utilization
  • Data mask signals (DM) to mask signal of WRITE data; DM is sampled on both edges of DK. output data clock signals
  • Data valid signal (QVLD)
  • HSTL I/O (1.5V or 1.8V nominal)
  • On-die termination (ODT) RTT
  • Operating temperature: 25-60Ω matched impedance outputs 2.5V VEXT, 1.8V VDD, 1.5V or 1.8V VDDQ I/O IEEE 1149.1 compliant JTAG boundary scan Commercial (TC = 0° to +95°C; TA = 0°C to +70°C), Industrial (TC = -40°C to +95°C; TA = -40°C to +85°C) OPTIONS Package:

概觀

Address inputs: Defines the row and column addresses for READ and WRITE operations. During a MODE REGISTER SET, the address inputs define the register settings. They are sampled at the rising edge of CK. Bank address inputs: Selects to which internal bank a command is being applied to. Input clock: CK and CK# are differential input clocks. Addresses and commands are latched on the rising edge of CK. CK# is ideally 180 degrees out of phase with CK.