I / O端口 16
電壓 - 電源 2.4-5.5
ISD(uA) 0.3
接口 I2C
中斷輸出 I/O state change
腳位/封裝 QFN-24, SOP-24
文件 Eval Board
狀態 Prod

IS31IO7325O 特徵

  • 400kHz I2C serial interface
  • 2.4V to 5.5V operation
  • 8 push-pull I/O ports
  • 8 open-drain I/O ports, rated to 20mA sink current at 0.22V headroom January 2014
  • -40°C ~ +125°C temperature range INTB output alerts change on inputs
  • Selectable I/O port power-up default logic states
  • Low 0.3μA (Typ.) standby current
  • Cell phones
  • Notebooks
  • SAN/NAS
  • Satellite radio
  • Servers

概觀

The IS31IO7325 2-wire serial-interfaced peripheral features 16 I/O ports. Ports are divided into eight push pull I/Os and eight open-drain I/Os and transition detection. Any of the 16 I/O ports can be configured as an input or an output. All I/O ports configured as inputs are continuously monitored for state changes (transition detection). State changes are indicated by the INTB output. The interrupt is latched, allowing detection of transient changes. When the IS31IO7325 is subsequently read through the serial interface, any pending interrupt is cleared. The open-drain outputs are rated to sink 20mA at 0.22V headroom, and are capable of driving LEDs. The RSTB input clears the serial interface, terminating any I2C communication to or from the IS31IO7325. The IS31IO7325 uses two address inputs to allow 4 I2C slave addresses. The slave address also determines the power-up logic state for the I/O ports.