IS31LT3352-V2-TR

電流 - 輸出/通道 750mA±5%
狀態 Prod
Vdd(V) 6-40
腳位數 SOP-8
文件 MR16_EB
驅動類型 DC/DC, Step-down
效率(%) 95
功率晶體管 Built-in
產品系列 31 = Commercial/Industrial Analog
IC代碼 3352 = 3352
產品類別 LT = Lighting LED Driver
包裝選項 blank = Tray or Tube
外包裝 Tape on Reel

IS31LT3352-V2-TR 特徵

  • Simple low parts count
  • Wide input voltage range: 6V to 40V
  • Up to 750mA output current
  • High efficiency (up to 95% )
  • 1200:1 dimming ratio
  • Typical 5% output current accuracy
  • Single pin on/off and brightness control using DC voltage or PWM
  • Up to 1MHz switching frequency
  • Inherent open-circuit LED protection
  • Thermal shutdown to protect IC itself
  • Low voltage halogen replacement LEDs
  • Automotive lighting
  • Low voltage industrial lighting
  • LED back-up lighting

概觀

The IS31LT3352 is a continuous mode inductive step-down converter, designed for driving a single LED or multiple series connected LEDs efficiently from a voltage source higher than the required LED voltage. The chip operates from an input supply between 6V and 40V and provides an externally adjustable output current of up to 750mA. Depending upon supply voltage and external components, this can provide up to 30 watts of output power. The IS31LT3352 includes an integrated output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. The IS31LT3352 integrates temperature compensation function in order to maintain LEDs’ stable and reliable operation. The IS31LT3352 measures the thermistance mounted close to LEDs. When ambient temperature near LEDs goes too high and the Negative Temperature Coefficient thermistors reach the value of threshold resistance connected at RTH pin, output current starts to reduce automatically. After the ambient temperature falls down to a safe temperature,the current will return to the set value. The IS31LT3352 can be connected as LED drivers’ chain with the same temperature compensation percentage. In this chain, every IS31LT3352’s ADJO output pin drives next stage’s IS31LT3352 ADJI input pin with temperature compensation information. So, only one thermistor is needed in the whole IS31LT3352 system.

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS31LT3352-V2 IS31LT3352-V1-TR
IS31LT3352 IS31LT3352-V1GRLS2-TR 10,000
IS31LT3352-V1 IS31LT3352-V2GRLS2-TR