IS34ML04G081

容量 4G
電壓 3.3V
狀態 Prod
總線寬度 X8
溫度範圍 -40°C to 105°C
腳位類型 48-TSOP
ECC要求 1-bit
順序讀取速度Ns 25
產品系列 34 = NAND
Device Technology M = Standard NAND (SLC)
Ecc Requirement 1 = 1-bit ECC
外包裝 = TRAY
Revision = First Generation
總線寬度 08 = x8
電壓 - 電源 L = 3.3V
密度配置 04G = 4G

IS34ML04G081 特徵

  • Flexible & Efficient Memory Architecture
  • - Organization: 512Mb x8 - Memory Cell Array: (512M + 16M) x 8bit - Data Register: (2K + 64) x 8bit - Page Size: (2K + 64) Byte - Block Erase: (128K + 4K) Byte - Memory Cell: 1bit/Memory Cell
  • Highest performance
  • - Read Performance - Random Read: 25us (Max.) - Serial Access: 25ns (Max.) - Write Performance - Program time: 400us - typical - Block Erase time: 3ms
    • typical
  • Efficient Read and Program modes
  • - Command/Address/Data Multiplexed I/O Interface - Command Register Operation - Automatic Page 0 Read at Power-Up Option - Boot from NAND support - Automatic Memory Download - NOP: 4 cycles - Cache Program Operation for High Performance Program - Cache Read Operation - Copy-Back Operation - EDO mode - Two-Plane Operation - Bad-Block-Protect
  • Advanced Security Protection
  • - Hardware Data Protection - Program/Erase Lockout during Power
  • Low Power with Wide Temp. Ranges Transitions
  • Industry Standard Pin-out & Packages
  • - T = 48-pin TSOP (Type I) - Single 3.3V (2.7V to 3.6V) Voltage Supply - 10 mA Active Read Current - 8 µA Standby Current - Temp Grades: - Industrial: -40°C to +85°C - Extended: -40°C to +105°C - Automotive, A1: -40°C to +85°C - Automotive, A2: -40°C to +105°C -

概觀

The IS34/35ML4G081 is a 512Mx8bit with spare 16Mx8bit capacity. The device is offered in 3.3V Vcc Power Supply. Its NAND cell provides the most cost-effective solution for the solid state mass storage market. The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. The device contains 4,096 blocks, composed by 64 pages consisting in two NAND structures of 32 series connected Flash cells. A program operation allows to write the 2,112-Byte page in typical 400us and an erase operation can be performed in typical 2ms on a 128K-Byte for X8 device block. Data in the page mode can be read out at 25ns cycle time per Word. The I/O pins serve as the ports for address and command inputs as well as data input/output. The copy back function allows the optimization of defective blocks management: when a page program operation fails, the data can be directly programmed in another page inside the same array section without the time consuming serial data insertion phase. The cache program feature allows the data insertion in the cache register while the data register is copied into the Flash array. This pipelined program operation improves the program throughput when long files are written inside the memory. A cache read feature is also implemented. This feature allows to dramatically improving the read throughput when consecutive pages have to be streamed out. This device includes extra feature: Automatic Read at Power Up.

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS34ML04G081-TLE 10,000 IS34ML04G081-TLI 1,000
IS34ML04G081-TLE-TR IS34ML04G081-TLI-TR 4,500