IS32LT3172-GRLA3-TR

電壓 - 電源 2.5~42
焊接 Lead-free (RoHS Compliant)
狀態 Prod
調光 Digital PWM
電流 - 輸出/通道 (mA) 10~200
外包裝 Tape on Reel
腳位/封裝 eSOP-8
通道數 1
文件 Eval Board
温規 Automotive Grade (-40C to +125°C)
類型 3172
Sink Source Sink
產品類別 LT = Lighting LED Driver
產品系列 32 = Automotive Analog and Mixed Signal
腳位/封裝 GR = SOP
焊料類型 L = Lead-free (RoHS Compliant)
IC代碼 3172 = 3172
Temperature Grade A3 = Automotive temp. (-40°C to 125°C)
包裝選項 TR = Tape & Reel

IS32LT3172-GRLA3-TR 特徵

  • Low-side current sink
  • - Current preset to 10mA - Adjustable from 10mA to 200mA with external resistor selection
  • Wide input voltage range from
  • - 2.5V to 42V (IS32LT3173) - 5V to 42V (IS32LT3172) with a low dropout of typical 1V
  • Up to 10kHz PWM input (IS32LT3173 only)
  • Protection features:
  • - 0.26%/K negative temperature coefficient at high temp for thermal protection
  • Up to 1.8W power dissipation in a small SOP-8- EP package
  • RoHS compliant (Pb-free) package
  • Automotive Grade:
  • - IS32LT3172
    • AEC-Q100 - IS32LT3173
    • AEC-Q100
  • Automotive and avionic lighting
  • Architectural LED lighting
  • Channel letters for advertising, LED strips for decorative lighting
  • Retail lighting in fridge, freezer case and vending machines

概觀

The IS32LT3172 and IS32LT3173 are adjustable linear current devices with excellent temperature stability. A single resistor is all that is required to set the operating current from 10mA to 200mA. The devices can operate from an input voltage from 2.5V to 42V with a minimal voltage headroom of 1V (typical). Designed with a low dropout voltage; the device can drive LED strings close to the supply voltage without switch capacitors or inductors. The IS32LT3172/73 simplifies designs by providing a stable current without the additional requirement of input or output capacitors, inductors, FETs or diodes. The complete constant current driver requires only a current set resistor and a small PCB area making designs both efficient and cost effective. The EN pin (3) of the IS32LT3172 can be tied to VBAT or BCM PWM signal for high side dimming. The EN Pin (3) of the IS32LT3173 can function as the PWM signal input used for low side dimming. As a current sink it is ideal for LED lighting applications or current limiter for power supplies. The device is provided in a lead (Pb) free, SOP-8-EP package.