IS46LR16200C-6BLA1-TR

Density	32M
Org	2Mx16
Pkg(Pins)	BGA(60)
Vcc	1.8V
Refresh	4K
No. of Words	2M
Models	IBIS
Solder	SnAgCu
Status	EOL
Outpack	Tape on Reel
Type	MDDR
Bus Width	16 = x16
Speed(Mhz)	up to 166Mhz
Temp.Range	Automotive Grade (-40C to +85°C)
Generation/Rev	C
Product Family	46 = DDR/DDR2/DDR3/DDR4 Automotive grade
Temp. Grade	A1 = Automotive Grade (-40°C to +85°C)
Solder Type	L = SnAgCu
Number Of Words	200 = 2M
Generation	C = C
Speed	6 = 166MHz
Operating Voltage Range	LR = 1.8V mobile DDR (LPDDR)
Package Type	B = BGA

IS46LR16200C-6BLA1-TR Features

JEDEC standard 1.8V power supply
64ms refresh period (4K cycle)
Two internal banks for concurrent operation
Auto & self refresh
MRS cycle with address key programs
Concurrent Auto Precharge
- CAS latency 2, 3 (clock) - Burst length (2, 4, 8, 16)
Maximum clock frequency up to 166MHz
Maximum data rate up to 333Mbps/pin
- Burst type (sequential & interleave)
Power Saving support
Fully differential clock inputs (CK, /CK)
All inputs except data & DM are sampled at the rising edge of the system clock
Data I/O transaction on both edges of data strobe
Bidirectional data strobe per byte of data (DQS) - PASR (Partial Array Self Refresh) - Auto TCSR (Temperature Compensated Self Refresh) - Deep Power Down Mode - Programmable Driver Strength Control by Full Strength or 1/2, 1/4, 1/8 of Full Strength
DM for write masking only
LVCMOS compatible inputs/outputs
Edge aligned data & data strobe output