| Vdd(V) | 5~42 |
|---|---|
| Solder | SnPb |
| Status | S=Q2/17 |
| Dimming | PWM & BCM |
| IOUT(mA) | 150 |
| Outpack | Tape on Reel |
| Pkg Pin(mm) | eTSSOP-16 |
| Channels | 2 |
| Temp.Range | Commercial Grade (0C to +70°C) |
| Type | 3126 |
| Sink Source | Source |
| Product Type | LT = Lighting LED Driver |
| Product Family | 32 = Automotive Analog and Mixed Signal |
| Part Number | 3126 = 3126 |
| Package option | blank = Tray or Tube |
The IS32LT3126 is a dual linear programmable current regulator consisting of 2 output channels; each channel capable of 150mA. The two channels can be combined to provide a total of 300mA. It supports PWM dimming via power line. It also features ENx pins to individually enable each channel between the OFF condition and the source condition. The ENx pins also can support PWM signal to adjust the output current. An external resistors program the current level for each of the channels. The UVx pins can be utilized to set the VCC under voltage lockout of each channel to match the LED stack for high side PWM dimming operation. The IC integrates fault protection for LED open/short, ISETx pin open/short and over temperature condition for robust operation. These failures can be reported by FAULT pin. The FAULT pins can all be tied together to disable the device and other IS32LT3126 devices on the same parallel circuit. In multiple LEDs per string application, the device also supports the single LED short detection by set the resister divider on the STx pins. The single LED short failure can be reported by the separated FAULT_S pin. The IS32LT3126 is targeted at the automotive market with end applications to include interior and exterior lighting. For 12V automotive applications the low dropout driver can support 1 to several LEDs per channel. It is offered in a small thermally enhanced eTSSOP-16 package.